| |
 |
|
WATER
PROOF COATINGS
Constant exposure to
natural elements has an adverse effect on building material, the
type, rate and degree of degradation depends on the environmental
conditions like heat, cold, rain, radiation and chemical environments.
However water in all its diverse forms like wind driven rain, condensation,
ground seepage through cracks, joints, porosity in substrates, terraces,
chhajas, and sloping roofs remains the most destructive element
which seeps through constructions weakening them.
To create a barrier against water penetration, to resist the environmental
forces and to protect the structure increasing its life, CHEMISTIK
has researched and developed some of the most effective Water
Proof Coatings which have the ability to resist a wide
range of external stress: physical, chemical and extreme climatic
conditions. Moreover they are designed to conform to stringent standards
civil engineering and architectural technology.
CHEMISTIK surface
coatings have proven their mettle over a range of metal and masonry
surfaces, significantly reducing maintenance costs.
DRY MIX MORTARS 
SEALANTS
Every structure, regardless
of size, height and width moves, to accommodate these movements
and to cushion the effect, maintains their integrity, elastic joints
are provided at various strategic locations throughout the exterior
of the structure. The dimensions and location of the joints are
directly related to the tolerance, thermal movement characteristics
of various components that make up the structure, potential shrinkage
and design aesthetics.
CHEMISTIK Sealants
are primarily used in joints in order to prevent passage of water
or air, to absorb expansion or contraction movements and to prevent
intrusion of foreign matter which may impede movements.
CHEMISTIK Sealants
are of various types like high performance which can accommodate
movements of ± 25% or more and normal performance types that
can accommodate movements upto ± 12.5%.
The selection of the correct sealant is very important and its selection
will depend upon the movement characteristics of the structure.
ADMIXTURES
CHEMISTIK
Admixtures are used mainly to modify the property
of concrete or mortar to make them more suitable for the work in
hand.
Use of Admixtures helps in Improving concrete strength reducing
permeability, segregation, attaining compaction workability, accelerating
or retarding the setting time without addition of more water.
CHEMISTIK Admixtures
perform effectively with various types of cement, aggregate, ambient
temperatures and curing condition..
Available in different types like: Water Reducers, Super Plasticizers.
Plasticizers Air Entraining Agents, Accelerators, Retarders. Each
is designed for a specific performance and effect.
The dosages are generally recommended broadly by manufacturers as
a guideline. However, one has to arrive at the correct dosage on
the basis of specification, mix design end site conditions to get
optimum benefits.
FLOORING
PRODUCTS
In chemical, pharmaceutical,
engineering, automobiles, fertilizer and abattoir Industries, the
floors are generally laid out in concrete. These are subjected to
constant industrial Impact, dusting, abrasion, chemical spillage,
and as a result, deteriorate fast.
Concrete floors can be restored and repaired with cement and aggregates,
but this approach may however hamper production, as freshly laid
concrete requires curing to complete hydrolysis In order to attain
its maximum strength. Moreover, this is not a lasting solution.
Chemistik Flooring
Products are superior alternatives since they can not
only be laid faster on existing concrete surfaces, but also help
in restoring the damaged portion keeping Its original property and
composition intact.
Chemistik Flooring Products, in fact, are formulated to suit Industrial
needs like abrasion, load Impact, chemical abrasion, moisture penetration
and pollution, and are ideal for the modern Industrial floor for
minimizing maintenance cost and downtime.
ANTI
- CORROSIVE COATINGS
Effectiveness of
coating and protection of metals depends on a thorough understanding
of the process of corrosion.
The steel used in metal structures is a highly processed materiel,
which is in en artificially alloyed state. After refinement, metals,
which are unstable materials actively, seek to recombine with oxygen
or other elements and this process is called corrosion.
As metals are constantly exposed to a corrosive environment, which
includes marine, chemicals and other pollutants, an effective barrier
is imperative over the metal surface to maintain the structure and
prolong its life.
Most often, surface coating systems like metal primers and top coat
finishes are used.
Chemistik Anti
- Corrosive Primers and Coatings have a good adhesive strength
and have the ability to cover Imperfection and bridge minute cavities.
The primer should be applied within one hour of surface preparation
of metal because the nature of the surface has a fine micro topography.
Moreover, metal will be protected against corrosion as long as sufficient
coating thickness of topcoats is provided. The topcoat should have
high resistance to abrasion and aggressive environmental conditions
and should be stable.
CHEMISTIK
POLYMER MODIFIED BITUMEN MEMBRANE
CHEMISTIK
PREMIUM
The masonry surfaces of all buildings
are constantly exposed to environmental pollutants, natural calamities
and Increasing, industrial corrosives.
There is a growing need for more protection to maintain the structures
and enhance their life.
Keeping long-term efficacy and protection in mind, Chemisol
has formulated a premium range of value added waterproofing coatings,
Argus.
These have been developed to provide heavy duty, lightweight, long
term protection, ensuring superb on-site performance.
Flooring Guide
|WATER PROOF
COATINGS| |SEALANTS|
|ADMIXTURES|
| FLOORING PRODUCTS|
|ANTI CORROSIVE COATINGS|
|ARGUS PREMIUM| |BITUMEN|
|MEMBRANE|
Our
Products range includes:
Site
Created by New
Media Interactive © 1999 webmaster
This site is Best Viewed on and Designed for 800 X
600 Resolution.
|
